2024 100% Free 500-220 Daily Practice Exam With 74 Questions
500-220 exam torrent Cisco study guide
Cisco 500-220 exam is designed to help candidates learn how to design, deploy, and manage Cisco Meraki solutions effectively. Engineering Cisco Meraki Solutions certification exam covers a wide range of topics, including network design and architecture, wireless networking, security and cloud computing. 500-220 exam is designed to test the candidates on their ability to analyze business requirements, design and implement Cisco Meraki solutions, and troubleshoot issues that may arise during deployment.
The Cisco 500-220 exam covers a range of topics, such as Meraki architecture and design, security and compliance, wireless LAN (WLAN), and mobility management. It also tests candidates' proficiency in configuring and troubleshooting Meraki MX Security Appliances, MS Switches, and MR Access Points. Passing 500-220 exam validates one's expertise in deploying and managing Meraki solutions, which are highly valued in the IT industry due to their ease of use, scalability, and cloud-based management capabilities.
NEW QUESTION # 11
What are two organization permission types? (Choose two.)
- A. Write-only
- B. Read-only
- C. Monitor-only
- D. Full
- E. Write
Answer: B,D
NEW QUESTION # 12
How is high-availability supported for Cisco Meraki devices?
- A. Only the MX Security Appliances that use VRRP support high availability.
- B. An active/active high-availability pair is recommended for MX Security Appliances.
- C. The MX Security Appliances and MS Series Switches that use HSRP support an active/passive high- availability pair.
- D. The MX Security Appliances and MS Series Switches that use VRRP support an active/passive high- availability pair.
Answer: D
Explanation:
Explanation
https://documentation.meraki.com/MS/Layer_3_Switching/MS_Warm_Spare_(VRRP)_Overview
NEW QUESTION # 13
Which VLAN is used to source pings across the site-to-site VPN when using the MX Live tools?
- A. highest VLAN ID that is configured and set to NO to use VPN
- B. lowest VLAN ID that is configured and set to YES to use VPN
- C. highest VLAN ID that is configured and set to YES to use VPN
- D. lowest VLAN ID configured and set to NO to use VPN
Answer: C
Explanation:
Explanation
See Behavior - Firmware MX 15.11 or Lower section For MXs running firmware MX15.11 or below, the source IP that MX uses while pinging a destination is the MX IP of highest VLAN ID. If the destination is across a VPN, the MX uses the MX IP of highest VLAN ID participating in VPN. For MXs running firmware MX 15.12+, additional ping options have been added to the live tool. The ping tool now has a drop down to select the source IP address for pinging destinations from the MX.
https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Using_the_Ping_Live_T
NEW QUESTION # 14
A Cisco Meraki MX security appliance is trying to route a packet to the destination IP address of
172.18.24.12. Which routes contained in its routing table does it select?
- A. directly connected 172.18.16.0/20
- B. Auto VPN route 172.18.0.0/16
- C. non-Meraki VPN route 172.18.24.0/24
- D. static route 172.16.0.0/12
Answer: C
Explanation:
Explanation
Route Priority
Each type of route configured on the MX has a specific priority in comparison with other types of routes. The priority is as follows:
Directly Connected
Client VPN
Static Routes
AutoVPN Routes
Non-Meraki VPN Peers
BGP learned Routes
NAT*
https://documentation.meraki.com/MX/Networks_and_Routing/MX_Routing_Behavior
NEW QUESTION # 15
Refer to the exhibit.
What is the minimal Cisco Meraki Insight licensing requirement?
- A. A single Meraki Insight license must be configured on network A, and a single license must be configured on network B, to gain Web App Health visibility on network B.
- B. A single Meraki Insight license must be configured on network B to gain Web App Health visibility on network B.
- C. Two Meraki Insight licenses must be configured on network A to gain Web App Health visibility on network B.
- D. A single Meraki Insight license must be configured on network A to gain Web App Health visibility on network B.
- E. Two Meraki Insight licenses must be configured on network A and a single license must be configured on network B, to gain Web App Health visibility on network B.
Answer: B
Explanation:
Explanation
If you only need traffic statistics from your spoke site clients then you only need to enable insight on the spoke network as the hub site will not gather data for remote sites.
https://community.meraki.com/t5/Wireless-LAN/Meraki-Insight-Licensing/m-p/152684 A license is only required for those networks where Meraki Insight functionality is desired. One license is required per network, regardless of whether that network has a single MX or HA pair. Licenses can be moved between networks, but historical data for the old network will be lost.
https://meraki.cisco.com/lib/pdf/meraki_datasheet_mi.pdf
NEW QUESTION # 16
Which configuration step is necessary when automatic updating is required of iOS apps provisioned through Systems Manager that are found in the App Store?
- A. Create a security policy that enables automatic updates.
- B. Configure automatic updating of iOS devices in the Meraki installed profile.
- C. Create a profile with automatic update enabled and apply it to iOS devices.
- D. No configuration step is necessary; automatic updating is the default behavior.
Answer: D
Explanation:
Explanation
By default, iOS apps provisioned through Systems Manager that are found in the App Store will self-update if automatic updates has been turned on in the Settings. For custom iOS apps, or to manually push down updates, check the following steps.
https://documentation.meraki.com/SM/Apps_and_Software/Updating_Managed_iOS_Apps
NEW QUESTION # 17
Drag and drop the settings from the left onto the OS system or systems that support it on the right Settings can be used more than once.
Answer:
Explanation:
Explanation
IOS:
Kiosk mode
Single App mode
Wallpaper
Cisco Security Connector
Active Sync
Android:
Kiosk mode
Backpack
Wallpaper
Active Sync
This question is related to the topic of in the Cisco Meraki documentation.
You can find more information about this topic in the [System Manager: Getting Started] article or the
[System Manager Overview] page.
https://documentation.meraki.com/SM/Profiles_and_Settings/Configuration_Settings_Payloads
NEW QUESTION # 18
Refer to the exhibit.
What are two outcomes reflected in the Web App Health application? (Choose two.)
- A. Network #1 could not load Google because of a remote server issue.
- B. Neither network recorded any server-side performance issues.
- C. Network #2 had better application performance than Network #1.
- D. Users on both networks may be experiencing issues when attempting to reach Google.
- E. Network #2 could not load Google because of a local client misconfiguration.
Answer: B,D
NEW QUESTION # 19
What are two ways peers interact with ports that Auto VPN uses? (Choose two.)
- A. For IPsec tunneling, peers use UDP ports 500 and 4500.
- B. For IPsec tunneling, peers use high UDP ports within the 32768 to 61000 range.
- C. For IPsec tunneling, peers use high TCP ports within the 32768 to 61000 range.
- D. Peers contact the VPN registry at UDP port 9350.
- E. Peers contact the VPN registry at TCP port 9350.
Answer: C,D
Explanation:
Reference:
_Configuration_and_Troubleshooting
NEW QUESTION # 20
Which enrollment method must be used when containerization is required on BYOD Android devices managed by Systems Manager?
- A. Android Business utilizing a BYOD Profile
- B. Android Enterprise utilizing a Work Profile
- C. Systems Manager container ID
- D. Systems Manager network ID
Answer: B
Explanation:
Explanation
https://documentation.meraki.com/SM/Device_Enrollment/Containerization_with_Systems_Manager
NEW QUESTION # 21
Refer to the exhibit.
What are the Loss and Average Latency statistics based on?
- A. responses that the MX appliance receives on the connectivity-testing hostnames on the Insight > Web App Health page
- B. responses that the MX appliance receives on the connectivity-testing IP addresses on the Help > Firewall info page
- C. responses that the MX appliance receives on the connectivity-testing IP address that is configured on the Security & SD-WAN > SD-WAN & Traffic Shaping page
- D. responses that the MX appliance receives on the connectivity-testing IP addresses on the Security & SD- WAN > Firewall page
Answer: C
Explanation:
Explanation
Quote from referred documentation-Link: Loss and latency will be determined over the configured IP address under Security and SD-WAN > SD-WAN and Traffic Shaping > Uplink Statistics. If no IP is configured, these values will be measured against 8.8.8.8 by default. On the WAN Health page, all the configured IP address statistics can be reviewed by changing the destination under the "Ping Destination" column.
https://documentation.meraki.com/MI/MI_WAN_Health#:~:text=Current%20loss%20and%20latency%20statist
NEW QUESTION # 22
Drag and drop the descriptions from the left onto the corresponding MX operation mode on the right.
Answer:
Explanation:
Explanation
Routed Mode:
This mode is the default mode of operation
This mode is generally also the default gateway for devices on the LAN
Client traffic to the internet has the source IP rewritten to match the WAN IP of the appliance DHCP services can be configured on the MX appliance Passthrough Mode:
The MX appliance acts as a layer 2 bridge
VLANs cannot be configured
No address translation is provided
This mode is not recommended at the network perimeter
This question is related to the topic of MX Addressing and VLANs in the Cisco Meraki documentation. You can find more information about this topic in the MX Addressing and VLANs article or the General MX Best Practices page.
NEW QUESTION # 23
A customer wants to use Microsoft Azure to host corporate application servers.
Which feature does the customer get by using a vMX appliance rather than connecting directly to Azure by VPN?
- A. intrusion prevention
- B. next-generation firewall
- C. SD-WAN
- D. malware protection
Answer: C
Explanation:
Explanation
https://documentation.meraki.com/MX/MX_Installation_Guides/vMX_Setup_Guide_for_Microsoft_Azure
NEW QUESTION # 24
Refer to the exhibit.
What are two outcomes reflected in the Web App Health application? (Choose two.)
- A. Users on both networks may be experiencing issues when attempting to reach Google.
- B. Neither network recorded any server-side performance issues.
- C. Network #2 had better application performance than Network #1.
- D. Network #1 could not load Google because of a remote server issue.
- E. Network #2 could not load Google because of a local client misconfiguration.
Answer: B,D
NEW QUESTION # 25
Air Marshal has contained a malicious SSID.
What are two effects on connectivity? (Choose two.)
- A. New clients can connect.
- B. New clients cannot connect.
- C. Currently associated clients are affected by restrictive traffic shaping rules.
- D. Currently associated clients stay connected.
- E. Currently associated clients are disconnected.
Answer: B,E
NEW QUESTION # 26
What are two organization permission types? (Choose two.)
- A. Write-only
- B. Read-only
- C. Monitor-only
- D. Full
- E. Write
Answer: B,D
Explanation:
Reference:
Managing_Dashboard_Administrators_and_Permissions
NEW QUESTION # 27
......
Use Valid New 500-220 Test Notes & 500-220 Valid Exam Guide: https://freetorrent.dumpstests.com/500-220-latest-test-dumps.html