[Apr 02, 2024] Juniper JN0-104 Exam Dumps Are Essential To Get Good Marks
Latest Juniper JN0-104 Dumps with Test Engine and PDF (New Questions)
Juniper JN0-104 (Junos, Associate (JNCIA-Junos)) Certification Exam is an essential certification for IT professionals who want to demonstrate their knowledge and skills in Juniper Networks Junos OS and routing and switching technologies. Junos, Associate (JNCIA-Junos) certification is recognized globally and is a valuable credential for network engineers and administrators who work with Juniper Networks equipment.
NEW QUESTION # 85
Click the Exhibit button.
Which two statements about the output shown in the exhibit are correct? (Choose two.)
- A. The IP address assigned to the router's ge-0/0/1.0 interface is 172.25.1.9.
- B. The neighbors are not using the Junos OS default OSPF priority value.
- C. The router has two OSPF adjacencies.
- D. The router ID of the neighbor connected to the ge-0/0/1.0 interface is 192.168.100.3.
Answer: B,C
NEW QUESTION # 86
Which of these are true about terms in a routing policy? (Choose two)
- A. If a term does not contain the from statement, Junos will not allow a commit operation.
- B. A routing policy can have only one term.
- C. If a term does not contain the from statement, all routes will match.
- D. A then statement may be missing from a term.
Answer: C,D
NEW QUESTION # 87
What is an advantage of multiple software processes running in the Junos OS?
- A. All processes are dependent on each other.
- B. Each process has its own protected memory space.
- C. Each process is started manually by the user at boot.
- D. Multiple processes allow each routing protocol to be independent.
Answer: B
NEW QUESTION # 88
Which statement is true about exception traffic?
- A. Exception traffic is automatically logged in /var/log/messages.
- B. Exception traffic requires some form of special handling.
- C. Exception traffic passes through the local device.
- D. Exception traffic requires a firewall filter before it can be acted upon.
Answer: B
NEW QUESTION # 89
Which two statements about the configure exclusive command are correct? (Choose two.)
- A. The command causes the loss of all uncommitted changes when exiting exclusive mode
- B. The command allows multiple users to edit private copies of the configuration concurrently.
- C. The command retains all uncommitted changes when exiting exclusive mode
- D. The command excludes other users from editing the configuration.
Answer: A,D
NEW QUESTION # 90
Exhibit:
Which type of route does the configuration create?
- A. a default gateway
- B. a non-advertised route
- C. an indirect next hop
- D. a generated route
Answer: A
NEW QUESTION # 91
You have two IP addresses configured on the ge-0/0/6 interface, as shown in the exhibit.
[edit interfaces ge-0/0/6]
user@router# show
{
familyinet {
address 172.16.10.100/24;
address 172.16.10.101/24;
}
}
You want to select the 172.16.10.101 address as the source address for packets sent from this interface to hosts on a remote subnet.
Which parameter would you add to the 172.16.10.101 address to complete this task?
- A. primary
- B. preferred
- C. broadcast
- D. arp 172.16.10.101
Answer: B
NEW QUESTION # 92
Which two statements about the configure exclusive command are correct? (Choose two.)
- A. The command causes the loss of all uncommitted changes when exiting exclusive mode
- B. The command excludes other users from editing the configuration.
- C. The command retains all uncommitted changes when exiting exclusive mode
- D. The command allows multiple users to edit private copies of the configuration concurrently.
Answer: A,D
NEW QUESTION # 93
Which three statements describe the Transmission Control Protocol (TCP)? (Choose three.)
- A. TCP is faster than the User Datagram Protocol (UDP).
- B. TCP application examples include HTTP and SMTP.
- C. TCP is a transport layer protocol.
- D. TCP provides delivery notification and error-checking mechanisms.
- E. TCP uses a best-effort delivery approach.
Answer: B,C,D
NEW QUESTION # 94
You issue the ping interface t1-1/1/0 1.1.1.1 bypass-routing count 1000 rapid command.
Which statement is correct?
- A. The count parameter creates a counter that you can view with the show firewall command.
- B. The count parameter allows the router to count the number of pings for logging purposes.
- C. The count parameter allows the router to pause for 1000 seconds before sending out a ping.
- D. The count parameter allows the router to send out 1000 pings and then stop.
Answer: D
NEW QUESTION # 95
Given the policy shown in the exhibit, which action will be taken when a static route to 172.10.16.0/24 is evaluated?
- A. reject
- B. go to default policy
- C. next policy
- D. accept
Answer: D
NEW QUESTION # 96
In which Junos mode are users allowed to monitor and troubleshoot software, network connectivity, and hardware?
- A. configuration
- B. privileged
- C. monitoring
- D. operational
Answer: D
NEW QUESTION # 97
Referring to the exhibit,
which command will cause this event message?
- A. request system halt
- B. request system commit
- C. request system recover
- D. request system logout
Answer: A
NEW QUESTION # 98
Which two statements describe the forwarding table in the Junos OS?
- A. If multiple matches exist, the forwarding table uses the least-specific entry to forward packets toward the destination.
- B. The forwarding table contains all known routes.
- C. Junos devices use the forwarding table to compare incoming packets against existing entries to determine the next hop.
- D. The forwarding table stores a subset of information from the routing table.
Answer: C,D
NEW QUESTION # 99
Which statement describes the role of a router on a broadcast domain?
- A. A router provides DNS service for the broadcast domain.
- B. A router connects small broadcast domains and forms larger broadcast domains.
- C. A router provides secure communications within a broadcast domain.
- D. A router facilitates communications between broadcast domains.
Answer: D
NEW QUESTION # 100
Click the Exhibit button
Referring to the exhibit, you are unable to reach devices in the 172.19.25.0/28 subnet.
What should you do to solve this problem?
- A. Enable the ge-0/0/2.0 interface.
- B. Enable the ge-0/0/2 interface.
- C. Enable the ge-0/0/2.2 interface.
- D. Enable the ge-0/0/2.1 interface.
Answer: A
NEW QUESTION # 101
You are connected to your Junos device using an SSH connection to the fxp0 interface. No other interface are currently configured beyond their default setting. You commit a configuration that makes the fxp0 interface unreachable from your management network.
In this scenario, how would you re-establish communication with the device?
- A. Power off and power on the device.
- B. Unplug the network cable and plug it back in.
- C. Connect to the console of the device.
- D. Establish an SSH connection to the loopback interface.
Answer: C
NEW QUESTION # 102
Which two statements are correct about the inet.0 routing table? (choose two.)
- A. It is used for populating the forwarding policy.
- B. It stores information learned from routing protocols and other sources.
- C. It is used for populating the forwarding table.
- D. It is used for populating the Ethernet switching table.
Answer: B,C
NEW QUESTION # 103
What are two benefits of 802.3ad link agregation? (Choose two.)
- A. In increases bandwidth
- B. It creates physical layer redundancy
- C. It simplifies interface configuration.
- D. It ensures symmetrical paths.
Answer: A,B
NEW QUESTION # 104
Which of these is true about Junos import policies?
- A. Import policies are used to filter routes from the routing table to the forwarding table.
- B. Import policies are used to filter routes being sent to neighbouring devices.
- C. Import policies are used to filter traffic entering the device.
- D. Import policies are used to filter routes destined for the routing table.
Answer: D
NEW QUESTION # 105
You are performing the initial configuration of an SRX Series device.
What must you set before the device will allow you to commit your configuration?
- A. Root authentication
- B. Management interface
- C. Hostname
- D. System time
Answer: A
NEW QUESTION # 106
In which routing table would you find an OSPFv2 route?
- A. inet.0
- B. ipv4-unicast
- C. inet.4
- D. inet.ipv4
Answer: A
NEW QUESTION # 107
Referring to the Exhibit,
What information is provided about the route to 192.168.47.0/24?
Choose Two
- A. There are two next-hops available to 192.168.47.0/24
- B. There are two active route to 192.168.47.0/24
- C. There is a single active route to 192.168.47.0/24
- D. There is a single next-hop available to 192.168.47.0/24
Answer: A,C
NEW QUESTION # 108
......
To prepare for the JN0-104 exam, candidates should have a strong understanding of networking fundamentals, including TCP/IP, routing protocols, and network security. Candidates can also take advantage of Juniper's training resources, which include online courses, webinars, and hands-on labs. In addition, candidates can use practice exams and study materials to help them prepare for the exam.
Juniper JN0-104 exam, also known as the Junos, Associate (JNCIA-Junos) exam, is a certification exam that measures an individual's knowledge of networking and Juniper Networks Junos OS. JN0-104 exam is designed to test the candidate's understanding of network fundamentals, Junos OS fundamentals, user interfaces, routing fundamentals, and security fundamentals.
DumpsTests just published the Juniper JN0-104 exam dumps!: https://freetorrent.dumpstests.com/JN0-104-latest-test-dumps.html