Easy To Download Network Appliance NS0-592 Exam Dumps Updated 67 Questions
New Updated NS0-592 Exam Questions 2021
NetApp NS0-592 Exam Topics:
| Section | Objectives |
|---|---|
| ONTAP OS | -Describe the tools available for support or troubleshooting -Demonstrate knowledge of ONTAP cluster administration -Demonstrate knowledge of data replication issues -Describe the structure of ONTAP OS -Demonstrate knowledge of how to troubleshoot ONTAP OS -Demonstrate knowledge of how to handle panic events |
| Software-defined ONTAP Solutions | -Describe software-defined ONTAP solutions |
| Protocols | -Demonstrate knowledge of ONTAP NAS configurations -Demonstrate knowledge of ONTAP SAN configurations |
| Performance | -Describe ONTAP performance concepts -Demonstrate knowledge of troubleshooting ONTAP performance |
| Hardware | -Demonstrate knowledge of hardware troubleshooting -Demonstrate knowledge of troubleshooting SP or BMC -Describe the hardware components in a Fibre Channel environment -Demonstrate knowledge of the cluster interconnect infrastructure -Describe MetroCluster configurations |
NEW QUESTION 37
An administrator wants to keep an automatic daily up-to-date copy of a volume at a disaster recovery location.
What should the administrator do to achieve this goal?
- A. Configure a SnapMirror relationship to the remote location.
- B. Perform an NDMP dump to the remote location.
- C. Configure a SyncMirror relationship to the remote location.
- D. Perform a volume relocation to the remote location.
Answer: A
NEW QUESTION 38
Click the exhibit button.
A customer reports that storage latency has recently increased substantially. No changes have been introduced, and the traffic did not change.
Referring to the output shown in the exhibit, which corrective step should be taken?
- A. Move some volumes off the affected aggregate.
- B. Add more spindles.
- C. Throttle the client traffic.
- D. Perform the volume reallocation.
Answer: C
NEW QUESTION 39
Click the exhibit button.
You are investigating an AutoSupport Disk Redundancy Failed alert. Cluster A lost connectivity to storage bridge BrB1, while cluster B lost connectivity to storage bridge BrA1.
Referring to the exhibit, which three components need investigation? (Choose three.)
- A. storage bridges BrB1
- B. FC switch SwA1
- C. FC switch SwB1
- D. FC switch SwA2
- E. ISL cables
Answer: B,C,E
NEW QUESTION 40
You migrated from a FAS3250 system to a new A200 system. After the migration, you notice that data compaction fails to be enabled on the migrated volumes.
In this scenario, which statement is correct?
- A. The volumes are thick-provisioned.
- B. You need to schedule background deduplication on all volumes.
- C. You need a license to have full efficiency on AFF systems.
- D. Data compaction is not supported on the A200 system.
Answer: A
NEW QUESTION 41
Click the exhibit button.
A customer reports that when they are failing over Hyper-V VMs, the process fails, and the server reports an error that indicates that there is something wrong with the storage.
Referring to the exhibit, which three actions would be required in ONTAP to solve this problem? (Choose three.)
- A. Verify that the oplocks share property is configured.
- B. Verify that the continuously -available share parameter is configured.
- C. Verify that -offline-files parameter is set to manual on the share.
- D. Verify that the -symlink-properties parameter is enabled on the share.
- E. Verify that the access-based-enumeration share parameter is configured.
Answer: A,B,E
NEW QUESTION 42
A customer's FAS8200 node1 went down an hour ago after a WAFL inconsistency error. All data is being served from partner node2, but the storage failover show command output is not showing a node1 as "Waiting for giveback".
What is the corrective action for this situation?
- A. Re-create the root aggregate on node1.
- B. Boot the system and run the wafliron command on the inconsistent data aggregate.
- C. Boot the system and run the WAFL_check command on the inconsistent data aggregate.
- D. From the LOADER prompt, run the wafliron command on the system's root aggregate.
Answer: A
NEW QUESTION 43
Your customer added a new DS2246 shelf to an existing stack on their FAS8060A system. The customer then noticed that the new shelf's disks appear with the shelf serial number instead of the shelf ID in the sysconfig -r command output.
What is the reason for this problem?
- A. The ACP is cabled incorrectly.
- B. The new shelf has the same ID as another shelf.
- C. There is failed IOM module in the new shelf.
- D. The SAS is cabled incorrectly.
Answer: D
NEW QUESTION 44
When does ONTAP 9.5 overwrite a block that contains existing data?
- A. after the block has been marked free
- B. when file permissions are changed
- C. when a file is copied in a LUN
- D. after a user edits a file
Answer: C
NEW QUESTION 45
End users are complaining of high latency when accessing an ONTAP 9 luster.
Which command helps you to determine whether there is a storage component that is contributing to this problem?
- A. qos statistics latency show
- B. sysstat -c 30 -M 1
- C. wafltop show -v -cpu -I 10 -c 5-n 6
- D. qos statistics performance show
Answer: D
NEW QUESTION 46
The error message shown below is reported in the EMS log file.
"[sis.changelog.full:warning]: Change logging metafile on volume DATA1 is full and can not hold any more fingerprint entries." What are two ways to solve this problem? (Choose two.)
- A. Increase the size of the changelog to allow the operation to continue.
- B. Modify the threshold that triggers a deduplication operation.
- C. Clear the changelog manually so that the operation can restart.
- D. Modify the storage efficiency policy so that deduplication runs more frequently.
Answer: A,B
NEW QUESTION 47
A customer reports that one their SVMs has two default gateways. The customer wants to know whether this behavior is expected or if one of gateways should be deleted.
In this scenario, what do you tell the customer?
- A. This situation is a misconfiguration, and the customer should delete one of the default gateways because there can be only gateway for each SVM.
- B. The configuration is acceptable only if both default gateways are in the same subnet.
- C. The configuration is acceptable if the customer configures different metrics on all defaults routes.
- D. The configuration is acceptable. The customer can achieve load balancing between the default gateways by setting the same metric on all default routes.
Answer: C
NEW QUESTION 48
Click the exhibit button.
A customer reports that their system recently began logging an error.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. The spmd application failed to restart the ntpd daemon.
- B. A user is attempting to restart the ntpd daemon.
- C. The bcomd application is responsible for monitoring the observed behavior.
- D. The ntpd daemon is responsible for time services.
Answer: B,D
NEW QUESTION 49
Click the exhibit button.
You are troubleshooting a system in which the customer reports that aggregates on Stack 6c/12b are having slow response tomes from system NETAPP1CLUS-02.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. The shelf module firmware is downrev; on system NETAPP1CLUS-02, replace IOM6 Module A on Shelf 10.
- B. The aggregates have only one PHY running at six gigabits per second on 6c.
- C. The aggregates have only PHY at six gigabits per second on 12b.
- D. PHY 2 is running at six gigabits per second; on system NETAPP1CLUS-02, reseat IOM6 Module A on Shelf 10.
Answer: A,B
NEW QUESTION 50
A customer reports that a takeover has been disabled on an HA pair.
What would be a cause for this to happen?
- A. The cluster network is not functioning properly.
- B. The interface for the hardware assist has become unavailable.
- C. There is a disk running too hot.
- D. The HA interconnect is not functioning properly.
Answer: D
NEW QUESTION 51
A customer reports that OnCommand Performance Manager shows that the workload on node-02 in a 4-node cluster has increased to a level that is higher than the threshold. The customer wants to avoid this issue becoming a performance problem.
Which two actions would result in achieving this goal? (Choose two.)
- A. Use the volume move command to move one or more volumes to another aggregate that is owned by another node that is less utilized.
- B. Use the storage aggregate relocation command to offload an aggregate to its partner.
- C. Use the storage aggregate scrub command to verify the parity on the busy aggregates.
- D. Physically move the shelf to another node that is less utilized.
Answer: A,D
NEW QUESTION 52
For restore purposes, a storage administrator on an ONTAP system created a FlexClone of a volume that contains a LUN from a specific snapshot. This LUN cannot be seen by a Windows client after a disk rescan is performed by using Disk Management.
In this scenario, which statement is correct?
- A. The cloned LUN needs to be mapped to an initiator group.
- B. The cloned LUN must be brought online.
- C. The cloned LUN must be renamed to a different name than the name of the source LUN.
- D. The cloned volume must be split from the source volume before the LAN can be used.
Answer: D
NEW QUESTION 53
A customer calls you about a performance issue that they experienced over the past few days. They want to know if data collection and root cause analysis (RCA) is possible for this issue. This issue appears to be a one time event.
Which tool would be used to satisfy the customer's request?
- A. perfmon
- B. perfstat
- C. OneCollect
- D. Performance Archive
Answer: C
NEW QUESTION 54
A customer performs a takeover and giveback of their controllers and notices that several of their NFS clients lose access to their volumes for a short period of time during the SFO process. The customer reviewed the LIF failover policies, and the polices are correct.
What is the reason for this behavior?
- A. A firewall is blocking the necessary network ports and needs to be updated to allow NFS communication.
- B. NFSv4 file locks need to be broken manually before initiating an SFO operation.
- C. The export policies are incorrect and must be updated with node's HA partner LIF information.
- D. The clients are using NFSv4 to access the volumes.
Answer: D
NEW QUESTION 55
Click the exhibit button.
A customer has the ns-switch shown in the exhibit.
Which two statements are true in this scenario? (Choose two.)
- A. User names not present in the local database are looked up in LDAP.
- B. Groups can be looked up both in the local database and in LDAP.
- C. User mapping decisions are always based on the LDAP configuration.
- D. Host names are always resolved using the configured DNS server.
Answer: B,D
NEW QUESTION 56
A non-maskable interrupt event occurs. The system panics and then reboots.
In this scenario, what would have caused the panic?
- A. a secd process
- B. a watchdog timer
- C. an ICMP blackhole detector
- D. a volume location distributed database
Answer: B
NEW QUESTION 57
Click the exhibit button.
Your customer reports that their FAS2554A system reports multi-path HA when running the sysconfig command. However, Config Advisor reports an error about incorrect cabling.
What are the two reasons for the messages? (Choose two.)
- A. The FAS2554 system is cabled incorrectly to shelf ID 20.
- B. Shelves 10 and 20 have different IOM modules and must be in separate stacks.
- C. The DS2246 shelf is wrong; the shelf ID must be 11.
- D. Disk shelves 10 and 20 are cabled incorrectly to each other.
Answer: A,D
NEW QUESTION 58
A new cluster running ONTAP 9.5 has just been installed and you want to create a FlexGroup volume. Which action will accomplish this task?
- A. Use the storage pool create command.
- B. Use the volume size command.
- C. Use the volume create command.
- D. Use the Deploy utility to provision the FlexGroup volume.
Answer: A
NEW QUESTION 59
Click the exhibit button.
Referring to the exhibit, which change is required to enable the CIFS Autolocation function for the Users share?
- A. Re-create the LIFs to allow both CIFS and NFS protocols.
- B. Edit the CIFS share's properties to remove the changenotify property.
- C. Modify the CIFS server's option to enable SMB multichannel.
- D. Change the CIFS share's Symlink Properties parameter to symlinks.
Answer: D
NEW QUESTION 60
A customer complains that the copy offload does not work when copying large file from a Windows 8 client between the CIFS shares that are hosted on the same ONTAP cluster.
What are two reasons for this problem? (Choose two.)
- A. The client should be using Windows 10 for ODX support.
- B. The source and target volumes reside on different cluster nodes.
- C. SMB 3.0 disabled on the CIFS SVM.
- D. Deduplication is not enabled on the destination volume.
Answer: C,D
NEW QUESTION 61
......
Updated Free Network Appliance NS0-592 Test Engine Questions with 67 Q&As: https://freetorrent.dumpstests.com/NS0-592-latest-test-dumps.html