Verified NCA-6.10 Dumps Q&As - NCA-6.10 Test Engine with Correct Answers
Pass Your NCA-6.10 Dumps as PDF Updated on 2025 With 78 Questions
NEW QUESTION # 20
Which bridge does the Controller VM use by default to communicate with the AHV host it runs on?
- A. vs0
- B. virbro
- C. bridge0
- D. bro
Answer: C
NEW QUESTION # 21
An administrator is conducting updates in a Nutanix cluster and is being prompted for handling non-migratable VMs.
Which VM type is non-migratable?
- A. VMs O VMs with attached Volume Groups
- B. VMs marked as an Agent
- C. VMs without NGT
- D. Memory Overcommitted
Answer: A
NEW QUESTION # 22
What minimum number of clusters must be registered to Prism Central to open a support case from the UI?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
The correct answer isB. 1
Nutanix Prism Central provides the ability to create and manage support casesdirectly from the UI, but this functionality requiresat least one clusterto be registered to Prism Central. The Support option becomes active onceone or more clustersare managed.
Important distinctions:
* Zero clusters(Option A): With no clusters registered, Prism Central is effectively disconnected from any environment and thus cannot associate logs or telemetry with a support case.
* One cluster(Option B): Enables access to support features, including log bundle generation and direct case submission.
* Options C and D (2 or 3 clusters) are incorrect; they arenot a requirementfor enabling support case functionality.
Prism Central UI Navigation Path:
Settings (gear icon) > Support > Create Support Case
Official Reference:
* Nutanix Prism Central Guide - Support Integration Section
* Excerpt: "To open a support case through Prism Central, ensure at least one cluster is registered.
Support features become available once a cluster is connected."
Conclusion:Only one cluster is required to activate the support case workflow in Prism Central.
NEW QUESTION # 23
An administrator receives the alert:
What is the most likely cause?
- A. Other nodes in the cluster may not have enough resource available.
- B. Another node in this cluster is already in maintenance mode.
- C. This node in the cluster may not have enough resources available.
- D. This node in the cluster is already in maintenance mode.
Answer: B
NEW QUESTION # 24
An administrator wants to enable Windows Defender Credential Guard.
What must be enabled when creating the VM?
- A. Live Migration
- B. UEFI
- C. Legacy BIOS
- D. HA
Answer: B
NEW QUESTION # 25
Which storage protocol is used by Nutanix Distributed Storage Fabric (DSF) to provide access to an ESXi hypervisor?
- A. LVM
- B. iSCSI
- C. NFS
- D. SMB
Answer: C
NEW QUESTION # 26
What is the purpose of the Recycle Bin?
- A. Stores the OpLog's most recent deleted data in case of a CVM failure.
- B. Centralizes the deleted data from the different VMs in the cluster.
- C. Keeps deleted VMs for 24 hours for recovery.
- D. Allows administrators to undo the last five actions.
Answer: C
NEW QUESTION # 27
What priority case can be opened to guarantee a 8-hour response for a customer with Production Support?
- A. P4
- B. P2
- C. P1
- D. P3
Answer: C
NEW QUESTION # 28
On a newly-deployed AHV cluster, what is the default virtual switch (vs0) uplink bond type?
- A. Balance-SLB
- B. Active-Backup
- C. Balance-TCP
- D. No Uplink Bond
Answer: B
Explanation:
On a newly deployed AHV cluster, the default uplink bond type for the virtual switch (vs0) isBalance-SLB (Source Load Balancing). This configuration balances traffic across the uplink interfaces based on the source of the traffic, ensuring optimal usage of available network bandwidth without requiring LACP configuration on the physical switches.
:
Nutanix AHV Networking Guide - Default Uplink Bond Types.
Nutanix Networking Best Practices for AHV Clusters.
NEW QUESTION # 29
Within Prism Central, which Compute and Storage section will allow an administrator to upload a Windows ISO file?
- A. OVAS
- B. Images
- C. Calatog Items
- D. Templates
Answer: B
NEW QUESTION # 30
At what time does LCM auto-inventory run by default?
- A. 2:00am
- B. 3:00am
- C. 1:00am
- D. 4:00am
Answer: B
NEW QUESTION # 31
Which bridge does the Controller VM use by default to communicate with the AHV host it runs on?
- A. vs0
- B. virbro
- C. bridge0
- D. bro
Answer: C
Explanation:
The Controller VM (CVM) uses thevs0bridge by default to communicate with the AHV host it runs on. The vs0bridge is a virtual switch configured on the AHV host, providing connectivity between the CVM, virtual machines, and external networks. This setup ensures efficient network communication within the Nutanix cluster.
Other options:
* virbro: Typically used in standalone KVM configurations, not in Nutanix AHV.
* broandbridge0: Incorrect references to Nutanix networking structures.
:
Nutanix AHV Networking Guide - Bridge Configuration.
Nutanix Prism Networking UI Documentation.
NEW QUESTION # 32
An administrator is configuring Erasure Coding on a Redundancy Factor 2 cluster.
How many nodes, at a minimum, are necessary?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 33
An administrator wants to change from Redundancy Factor 2 to 3, but it is not allowed.
What must the administrator check?
- A. Check AOS version and upgrade, if needed.
- B. Check hardware availability of the nodes.
- C. Check that the cluster has been properly licensed.
- D. Check that the cluster has five or more nodes.
Answer: D
Explanation:
Redundancy Factor 3 (RF3) requires a minimum of five nodes in the cluster to ensure that data can be distributed across enough nodes to tolerate the failure of two nodes. If the cluster has fewer than five nodes, RF3 cannot be enabled.
* A. Check that the cluster has been properly licensed:Licensing is not directly related to enabling RF3.
* B. Check that the cluster has five or more nodes:Correct, as RF3 requires at least five nodes.
* C. Check hardware availability of the nodes:While hardware health is important, it does not determine RF3 eligibility.
* D. Check AOS version and upgrade, if needed:RF3 requirements are not specific to an AOS version.
References:
Nutanix Best Practices Guide for RF2 and RF3.
Nutanix Support KB Article on RF Configuration Requirements.
NEW QUESTION # 34
When using the LCM Dark Site procedure in Prism Element or Prism Central, which Nutanix software component should be checked and upgraded first?
- A. Foundation
- B. MSP
- C. NCC
- D. LCM Framework
Answer: D
Explanation:
When using the LCM (Life Cycle Manager) Dark Site procedure, theLCM Frameworkshould be checked and upgraded first. The LCM Framework is the core component responsible for orchestrating updates for other Nutanix software components. Ensuring the framework is up to date guarantees compatibility and reliability during subsequent upgrades.
* A. MSP:Incorrect, as MSP (Managed Service Provider) is not directly related to the LCM Dark Site procedure.
* B. Foundation:Incorrect, as Foundation is used for initial cluster deployment, not for lifecycle management.
* C. NCC:While NCC is critical for health checks, it does not need to be updated first in the LCM process.
* D. LCM Framework:Correct, as it manages the update process and must be updated first.
References:
Nutanix Life Cycle Manager Guide.
Nutanix Support Knowledge Base Article on LCM Dark Site Upgrades.
NEW QUESTION # 35
Which feature should be enabled to prevent password access to the CVM for both the nutanix and admin user accounts?
- A. Data-at-Rest Encryption
- B. Cluster lockdown
- C. STIG
- D. RBAC Policy on PC
Answer: B
NEW QUESTION # 36
What is the minimum cluster size for Redundancy Factor 3?
- A. 6 nodes
- B. 3 nodes
- C. 4 nodes
- D. 5 nodes
Answer: D
Explanation:
https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_20:arc-redundancy-factor3-c.html
NEW QUESTION # 37
When multiple Alert policies are applied to an entity, which will take precedence?
- A. Policy are applied to a specific entity type.
- B. Policy are applied to an entity type in a cluster.
- C. Policy are applied to all entities of an entity type.
- D. Policy are applied to an entity type in a category.
Answer: A
Explanation:
When multiple alert policies are applied to an entity, Nutanix uses a hierarchical approach. Policies applied to an entity type within a categorytake precedence. For example:
* If a category (e.g., "Production") has policies applied to entities like VMs, and the entity matches that category, the category-specific policy will override general policies.
* This prioritization allows administrators to fine-tune alert policies for specific workloads or environments.
:
Nutanix Alerts Management Guide - Policy Precedence Overview.
Nutanix University Certification Training Material.
NEW QUESTION # 38
Shared storage for Windows Server Failover Clustering (WSFC) is a use case for which Nutanix Unified Storage solution?
- A. FT1
- B. Files
- C. Volumes
- D. RF2
Answer: C
Explanation:
Shared storage for Windows Server Failover Clustering (WSFC) is a use case for NutanixVolumes. Nutanix Volumes provides block storage (via iSCSI) to external systems, such as WSFC nodes, allowing them to share storage for failover clustering. This configuration is essential for high availability in Windows environments.
Other options:
* Files: Provides file-based storage (NFS/SMB), not suited for WSFC shared block storage.
* FT1 and RF2: Refer to Fault Tolerance and Redundancy Factor, not storage solutions.
:
Nutanix Unified Storage Guide - Volumes Use Cases.
Nutanix Best Practices for Windows Clustering.
NEW QUESTION # 39
Nutanix Support has asked an administrator to provide an NCC output, but there is no access to the command line.
What should the administrator do to provide the requested NCC output?
- A. Configure email in Alert Settings and Run Health Checks in the Health Dashboard.
- B. Run Health Checks in the Alert Dashboard and enter an email to send it to.
- C. Configure email in Alert Settings and Run Health Checks in the Alert Dashboard.
- D. Run Health Checks in the Event Dashboard.
Answer: A
Explanation:
When command-line access is unavailable, Nutanix administrators can use the Prism UI to generate an NCC (Nutanix Cluster Check) output. The steps are:
* Configure the email settings inAlert Settingsunder the Prism UI.
* Navigate to theHealth Dashboard, where the "Run Health Checks" option can be used.
* Provide the administrator's email address to send the health report, which includes NCC outputs.
This method enables the administrator to share diagnostic information with Nutanix Support directly via email.
* A. Run Health Checks in the Alert Dashboard and enter an email to send it to:Incorrect. Health Checks are run from the Health Dashboard, not the Alert Dashboard.
* B. Configure email in Alert Settings and Run Health Checks in the Health Dashboard:Correct.
This provides the requested NCC output when the command-line is inaccessible.
* C. Run Health Checks in the Event Dashboard:Incorrect. Health Checks are not run from the Event Dashboard.
* D. Configure email in Alert Settings and Run Health Checks in the Alert Dashboard:Incorrect, as this is not the correct location for Health Checks.
References:
Nutanix Administration Guide: Health Dashboard and NCC.
Nutanix Support Knowledge Base Article on Sending NCC Reports Without CLI Access.
NEW QUESTION # 40
......
Pass Nutanix NCA-6.10 Exam Info and Free Practice Test: https://freetorrent.dumpstests.com/NCA-6.10-latest-test-dumps.html